2022 Seawind 1160 Resort12m

• 6 x Docking cleats. Each side : bow, stern & amidships
• 1 x Heavy duty mooring cleat on forward walkway
• Sheet winches : 2 x 45ST – 2 speed self tailing
• Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines.  With 700mm high lifelines to meet CE requirements.
• 2 x transom access gates with pelican hook releases
• 2 x side access gates with pelican hook releases
• Aft swim ladder: folding stainless aft swim ladder

• Flowcoat interior finish
• Lightweight cupboard doors and trimmings

PORT HEAD:

• Light weight pvc foam cored door
• Manual toilet. Discharge via holding tank
• Holding tank built in. Discharge pump out by shore station or directly overboard 130L
• Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements
• Vanity basin with pressure water
• Large quantity cupboards

• Spacious galley with scratch resistant counter surfaces
• Double bowl stainless steel sink
• Pressure fresh water system
• Top loading Ice Box
• Under bench storage

• Twin Yamaha 25hp 20” engines. Mounted under aft seating
• 5” leg extensions added to engines to reduce cavitation
• Remote electric key start with electric tilt fitted
• Dual engine controls at helm station
• 200l fuel tank

• High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display
• Marine grade tinned electrical wiring with extensive use of heat sealed connectors
• Batteries x 3 comprising: House System (260 amp hrs) : 2 x 130 amp hr heavy duty batteries One engine cranking battery – 130 amp hr heavy duty battery
• 230amp heavy duty isolation switch
• 12 V lighting : Numerous 12V interior lamps and courtesy lights throughout including recessed lights in cockpit
• 4 x 12V Outlets
• CE approved navigation lights. Port & Starboard mounted on bow rails
• Deck floodlight mounted on spreaders
• Mast head anchor / riding light
• 2 x 120W Solar panels and solar regulator

• Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig
• Standing Rigging:
• Forestay 3/8 (10mm) 1 x 19 Dieform wire
• Sidestays 3/8 (10mm) 1 x 19 Dieform wire
• Diamonds 5/16 (8mm) 1 x 19 Stainless Steel wire

• Halyards:
• Main halyard: 12mm Spectra rope : Heavy duty shackle
• Jib halyard: 8mm Spectra rope. Heavy duty shackle
• Topping lift: 8mm rope. Heavy duty shackle
• Boom outhaul: 10mm Spectra

• Single line reefing, run to helm. Three reefing points with 2 reef lines:
• Reef 1&3: 10mm rope. Leech/Clew blocks and snap shackle
• Reef 2: 10mm rope. Heavy duty shackle

• Sheets:
• Main sheet: 10mm rope
• Main traveller control:  8mm rope
• Jib sheet: 10mm rope

• Reefing lines and sheets to be lead back to cockpit through turning blocks and rope clutches
• Fully battened mainsail. Triple stitched reinforced construction. Leach adjustable batten end caps. Fibreglass sail battens
• Mainsail cover with integrated lazy jack system