1 of 39
Cutter rig with in-mast furling on deck, teak and leather inside.
**Available for Co-brokerage only with prior agreement**
If you have any questions about this specification please either email brokerage Brokerage@oysteryachts.com
Or contact our team on the following:
UK & IRELAND
T: +44 (0) 1473 851 430
T: +1 401 924 3434
REST OF WORLD
T: +34 677 429 116
Interested in another size of boat? Or just need peace of mind that this specification is your dream Oyster? Either way check out our live listings on our website : https://oysteryachts.com/sailing-yachts-for-sale/brokerage-listings
The iconic Oyster 66 with raised saloon has the ability to fulfil multiple roles, be it bluewater cruising with the family or extended round the world exploring.
Exceptional accommodation allowing for ten berths in five cabins, ELISE can perform both roles with ease. The designers at Oyster deserve great credit for executing such a versatile and comfortable interior layout, which offers the features of a much larger yacht.
ELISE offers a rare opportunity to own one of the last hulls of just a dozen Oyster 66s ever built.
DESIGN: Oyster Design Group
RIG: Cutter rig with hydraulic in-mast furling
ACCOMMODATION: Ten berths in five cabins
VAT STATUS: Not paid
LOA: 20.37m (66’10”)
LWL: 17.01m (55’10”)
BEAM: 5.48m (18’0”)
DRAFT: 2.67m (8’9”)
DISPLACEMENT: 38,000kg (83,774lb)
AIR DRAFT: 27.40m (89’11”)
LYING: Oyster Newport, RI, USA
HULL NUMBER - Oyster 66/05.
HULL CONSTRUCTION - Laid-up GRP, single skin with structural stringers and floors to Lloyd’s approved design specification. Produced using a Lloyd’s approved gelcoat and laminating resin. The gelcoat and three outer laminates incorporate powder-bound matts. Isophthalic resin is used to the hull, tanks, coachroof and deck lay-ups.
HULL FINISH - Hull in ‘Light Grey’ gelcoat with cove line and double boot top lines in ‘Dark Grey.’ Bottom repainted (2019), Micron 66/Propspeed.
DECK CONSTRUCTION - Moulded in GRP with balsa core. Oyster deck saloon profile with ‘eyebrow’ styling.
DECK FINISH - Teak laid decks (raised foredeck and lazarette hatch teak needs replacement). Bulwark finished with teak capping rail.
KEEL - High performance bulb (HPB) external lead keel.
RUDDER - Fully protected skeg-hung rudder.
STERN DESIGN - ‘Sugar scoop’ stern design with bathing platform trimmed with teak slats and stainless steel steps for access to the stern deck.
EURCD - Built to comply with the requirements for Category A – Ocean.
ANCHOR - 48kg (105lb) CQR anchor with 110m (360’) of 12mm (1/2”) chain. New anchor chain in Auckland (2018) - 100m (328’) length/12mm (1/2”) galvanized. 27kg (60lb) Danforth kedge anchor with 100m (328’) Octoplait warp, and 15m (49’) of 12mm (1/2”) chain. Fortress FX125 anchor. Anchor stowage in sail locker. Stowage compartment with removable partition at forward end of anchor locker for kedge warp and chain.
WINDLASS - Lewmar 3000 vertical gypsy/capstan type electric anchor windlass. Removed, fully serviced, and remounted in Antigua (2019). Two-way and operated by adjacent foot switch controls at bow. Additional controls at pedestal.
DECK ACCESS - Midship gateway stanchions with stainless steel hinged boarding ladders, which close up to form the side-gates. Gate to pushpit. Fold down stainless steel bathing/boarding ladder. 3m (9’10”) alloy passerelle with halyard, clutch, spreader bar, and guy lines.
HATCHES - Oyster custom vertical, drop-down washboard system for main companionway. Aft companionway hatch fitted with acrylic sliding lid. Lewmar alloy-framed deck hatches. Gebo alloy-framed coaming portlights. Gebo alloy-framed opening hullports. Rondal deck prisms in passageway and aft owner’s shower.
CANVASWORK - Large ‘Grey’ acrylic fold down companionway sprayhood with leather covered stainless steel grab rail to aft end. Bimini in ‘Grey’ acrylic, with shortened bimini over helm station when large bimini not in use. Canvas cover for cockpit table in ‘Grey’ acrylic with lift-up flap to access icebox. ‘Grey’ acrylic canvas covers for pedestals and steering wheels. Cockpit cushions.
DECK PLUMBING - Hot and cold freshwater deck shower in transom locker. Anchor/deck wash.
COCKPIT - Walk-through teak-laid cockpit. Split into separate crew and guest areas, both cockpits have a clear central walkway aft, giving access from the companionway to the helm positions or aft deck. The guest cockpit is self-draining, whilst the helm position will drain out both aft and forward. Pair of waterproof loudspeakers mounted within the coamings either side of the guest cockpit. Two lockers under each side seat fitted with a hinged lid to provide excellent cockpit storage space. The helmsman’s cockpit has twin custom GRP steering pedestals. Drinks holder on each steering pedestal.
COCKPIT TABLE - Gloss varnished teak cockpit table with stainless steel frame, folding leaves, and refrigerated GRP box.
STEERING - Twin custom GRP steering pedestals, each incorporating a 0.90m (36”) diameter Destroyer type stainless steel steering wheel, friction brake, and three bearing pedestal steering unit. Leather covers to steering wheels.
OUTBOARD BRACKET - Outboard bracket suitable for up to 15hp outboard motor.
DAVITS - Whittall manual davits (300kg/661lb maximum total load).
GENERAL - Stainless steel pulpit and pushpit. Stainless steel fairleads, mooring and cockpit cleats. Additional pair of stainless steel mooring cleats at aft deck. Stainless steel dorade vents. Custom shelves and stowage for scuba tanks. Air compressor. Liferaft stowage built into foredeck. Stern quarter pushpit seats in teak and stainless steel. Stainless steel pole at stern for aerials. Gas locker for two bottles. Two fishing rod holders at pushpit rails.
MAST AND RIGGING - Cutter rig with self-tacking staysail. Full inspection of rigging, dye testing, and full rebuild (2019). Hood Stoway mast with hydraulic in-mast furling and hydraulic in-boom outhaul. In-mast furling motor serviced in Auckland (2018). Discontinuous stainless-steel rod rigging. Preventer lines. Navtec boom vang. Navtec hydraulic backstay tensioner. Jumper struts. Two folding steps at masthead. No-Strike lightning ion dissipaters at masthead.
HEADSAIL FURLING - Reckmann hydraulic headsail furling. Reckmann manual staysail furling. Refurbished by RigPro in Auckland (2018).
WINCHES - By Lewmar – Lewmar Ocean, self-tailing winches in chrome finish:
2 x 77 CEST 3-speed, electric primary winches. 2 x 58 CST 2-speed secondary winches. 2 x 58 CEST 2-speed electric mainsheet winches. 1 x 58 CST 2-speed staysail sheet winch. 1 x 54 CST 2-speed reefing control line winch. 1 x 58 CEST 2-speed main halyard winch. 1 x 58 CST 2-speed genoa and staysail halyard winch. 1 x 40 2-speed winch for traveller.
SPINNAKER GEAR - Single spinnaker pole stowed vertically on mast. Package includes two guys, two sheets, single foreguy, deck gear, including chainplates, foreguy arrangement, and all required blocks. Sidewinder spinnaker pole heel control.
SAILS - Furling mainsail - Doyle Stratis cruising laminate (Auckland 2018). Furling yankee with UV strip and foam luff by North Sails (2018). Furling self-tacking staysail - North Sails cruising woven laminate (Cape Town 2018). Quantum 1.5oz asymmetrical spinnaker with squeezer.
GENERAL - Ten berths in five cabins, excluding the saloon. All berths, including doubles are counted as sea berths, and doubles have split mattresses allowing a central lee cloth to provide necessary support and separation. Sea berths have fitted Dacron lee screens with lanyards to through-bolted eyes. Interior joinery finished in teak with Oyster ‘Millennium’ style detailing. Designed to be modern and coordinated, whilst remaining practical and durable at sea. Essential features include sculpted fiddles and grab rails, ‘shadow-gap’ joints between panels, solid, shaped teak and stainless steel grab handles, and Oyster custom knobs for lockers and drawers. All drawers use metal runners giving extremely smooth operation. Solid framed doors with inlaid border. Door furniture by Timage with chrome hinges and handles. ‘Chequerboard’ style teak cabin sole with ‘Black’ Avonite perimeter line inlay. Galley work surfaces and upstands in ‘Aztec Brown’ Avonite. Each head compartment is fitted out with a Tapmate white enamel washbasin, under-mounted to a ‘Venetian White’ Avonite surface, and finished in a joinered timber and mica laminate. Quality mixer taps/faucets with matching pressure-balanced shower hardware. Matching towel rail, pair of toothbrush holders, soap dish, and toilet roll holder fitted in each head. Headlining and deck saloon sides in off-white vinyl. Padded saloon table cover. ‘Cream’ leather upholstery to saloon. ‘Yellow’ upholstery to owner’s stateroom headboard, berth surround and seating. Crew covers. Curtains to windows in all cabins. Oceanair skyscreens to all deck hatches (except sail locker). Flyscreens to all opening hull and coachroof ports, and on main and aft companionway hatches. Clock and barometer. Caframo Bora fans throughout.
FORWARD SAIL LOCKER - Forward sail locker accessed via its own deck hatch with Lewmar lock. Steps fitted in sail locker.
FORWARD (SHARED) HEAD/SHOWER - Shared forward head with Jabsco electric toilet, washbasin and shower. Lockers for wash bag, cleaning materials and linen stowage. Mirror.
PORT FORWARD TWIN CABIN - Twin cabin to port with upper and lower bunk berths. Cedar lined hanging locker. Access to forward head.
STARBOARD FORWARD DOUBLE CABIN - To starboard with double berth and cedar lined hanging locker. Extra chart stowage under bunk.
GALLEY - To port, opposite the mast, the spacious galley has extensive worktop space, plentiful storage lockers and large rubbish bin. Stowage for crockery and cutlery.
SINKS - Twin stainless steel sinks.
COOKER/HOB - Gimballed Force 10 stainless steel cooker with 4-burners, grill and oven, protected by a flame failure gas cut-off device. Extractor fan fitted over cooker. Cooker incorporates an electronic ignition system for all functions. Harbour lock and cooker crash bar.
REFRIGERATOR/FREEZER - Front opening refrigerator with shelves and automatic light, plus top-loading freezer box with stowage baskets. Glacier Bay refrigeration system, panel and doors. Compressor and pumps replaced in Fiji (2018).
LOWER SALOON/SEATING AREA - To starboard of mast with two chairs and a desk, plus locker in between. Glass and bottle stowage locker. Bookcase. Stereo unit. Oilskin locker. Ice maker.
WASHER/DRYER - Bosch WVF2401 washer/dryer.
ENGINE ROOM - Accessed from the lower level, near the galley and built of sound insulating foam and barrier insulation. Access panels in the high level saloon sole are fitted with rubber sealing strips to minimise noise and secured by positive catches. 24V lighting and a large 24V extractor fan installed and switched at the DC electrical panel.
HIGH LEVEL SALOON - Access to the high level saloon from the cockpit is via a set of teak steps with teak and stainless steel handrails. The deck saloon is extremely light and airy, with seven windows providing an almost panoramic view of the exterior, which contributes to the great feeling of light and space. Featuring a wraparound settee to port, upholstered in ‘Cream’ leather, surrounding a rectangular, expandable oak burr table to provide a large comfortable dining area. Drawer and cupboard in table pedestal base. Additional seating to starboard. Lockers behind seat backs. TV in custom locker.
NAVIGATION AREA - A comfortable forward facing navigation/chart table area located to starboard in the upper area. The chart table is customised around the strategically-sited electronics and navigational equipment, which is flush mounted in a dark grey fascia. A small stainless steel support stay is fitted to the chart table lid. Provision for stowage of half-folded Admiralty size charts in large drawer beneath. Stainless steel bookshelf at forward end of chart table.
PORT AFT DOUBLE GUEST CABIN - With double berth and drawers beneath. Cedar lined hanging locker and small vanity unit. Access to en suite (shared) head/shower compartment.
EN SUITE AND SHARED HEAD/SHOWER - Situated to port and shared with the starboard aft cabin via a separate access door from the aft passageway. VacuFlush electric toilet, washbasin, and separate shower stall. Lockers for wash bag, cleaning materials and linen stowage. Mirror. Hooks for hanging wet weather gear.
STARBOARD AFT TWIN CABIN - With lower berth and stowable upper Pullman berth. Desk, computer and printer storage, file drawer and full-height locker with two doors and shelves.
OWNER’S STATEROOM - Configured with a double berth offset from centreline. Settee. Pair of large cedar-lined hanging lockers, with 3-brick safe. Abundant drawer and locker space. Mirror. Access to aft en suite head/shower compartment located forward to starboard. Central door leads to passageway running forward beneath cockpit. Separate companionway hatch to aft deck via a sliding hatch, and stainless steel ladder offset to starboard.
EN SUITE HEAD/SHOWER - To starboard with separate large shower stall. VacuFlush electric toilet and washbasin. Lockers for wash bag, cleaning materials and linen stowage. Mirror. Hooks for hanging wet weather gear. Extractor fan.
AUDIO VISUAL SYSTEMS - Pioneer DEH 4100R and CDX P25 CD auto-changer for six CDs. Speakers to cockpit and aft end of main saloon, plus two additional speakers to galley and lower saloon. Volume controls by companionway allowing cockpit speakers to be controlled independently of saloon speakers. Remote control to stereo. 53cm (21”) multi-standard television and video in custom saloon locker. Radio/cassette player and speakers to aft cabin.
ENGINE - Perkins M225Ti turbo-charged diesel engine of 168kW (225hp) at 2500rpm. Hurth 630 gearbox giving 2:1 reduction. Racor twin fuel filter and water separator.
ENGINE HOURS - Approximately 2,438 at September 2021.
PROPELLER - Max-Prop Whisper 5-bladed folding propeller.
ROPE CUTTER - Ambassador rope cutter on shaft.
ALTERNATORS - Twin alternators: 40A/24V to charge engine start batteries. 175A/24V to charge domestic batteries.
GENERATOR - Westerbeke 12.5kW BTDC generator with sound shield.
GENERATOR HOURS - Approximately 6,624 at September 2021.
BOW THRUSTER - Max-Power R315/2 electro-hydraulic, retractable bow thruster.
STEERING SYSTEM - Whitlock cable system.
HYDRAULICS - Lewmar Commander 400 system located in sail locker to operate headsail, main furling, and outhaul.
AIR CONDITIONING/HEATING - 220V Cruisair reverse cycle air conditioning system comprising of: 2 x 16,000 BTU units. 2 x 12,000 BTU units. Giving a total of 56,000 BTUs.
ICE MAKER - U-Line ice maker in bar area with its own dedicated inverter.
WATERMAKER - Seafresh H204A watermaker producing approximately 180 litres (36 Imp gallons/48 US gallons) per hour. PUR 21V watermaker, as backup.
FUEL - 2,020 litres approximately (444 Imp gallons/534 US gallons) in three GRP tanks.
WATER - 1,650 litres approximately (363 Imp gallons/436 US gallons) in three GRP tanks.
TANK TENDER GAUGES - Fuel and water tank tender gauges, plus backup dipsticks.
HOT WATER - From an insulated approximately 64 litres (14 Imp gallons/17 US gallons) tank heated by the engine’s heat exchanger, or by thermostatically-controlled 220V, 2kW immersion heater element.
PRESSURISED HOT AND COLD WATER SYSTEM - Hot and cold pressurised freshwater system based on a high capacity Cleghorn Waring AMFA88 pump, pressure accumulator tank, and Acorn polypropylene pipework and fittings. Drinking water tap/faucet with Seagull charcoal filter system.
HOLDING TANKS - Three plastic (Polypropylene) toilet holding tanks - one forward and two aft, with gravity discharge and additional ability to pump out from on deck. Wema electric tank capacity gauges.
GREY WATER - Two grey water tanks, each fitted with a Whale float switch and Whale Gulper pump for automatic evacuation of all showers and washbasins.
MANIFOLD SYSTEM - Stainless steel manifolds, one forward and one aft, for seawater inlets to reduce through-hull fittings.
SHIP’S SUPPLY - 24V.
RING MAIN - 220V AC ring main with eight double outlet sockets located as appropriate within the layout.
OTHER ELECTRICAL SOCKETS - 7 x 12V cigar lighter sockets located at navigation station, starboard cabin, inside companionway, in lower saloon, and aft cabin. Shaver socket in aft guest head. 2 x 24V sockets at pedestal and on deck. 2 x waterproof switches in lazarette.
BATTERIES - Domestic: 24V battery bank upgraded to Rolls batteries giving 820Ah dedicated to domestic supply. New 8 x Lifeline AGM 8D 12V batteries (January 2020). Engine start: 24V battery bank giving 176Ah dedicated to engine starting. Generator start: Separate 12V battery dedicated to generator starting.
BATTERY MANAGEMENT - 2 x Mastervolt MASS 24V/100A heavy-duty battery chargers. Magnetronic DCC4000 voltmeter, ammeter and ampere/hour meter. Emergency link.
INVERTER - Mastervolt MASS 24V/2500W sine wave inverter.
SHORE POWER - 50A dockside power cable of yellow 3-core double-insulated PVC 21.3m (70’) in length. Additional shore power cable. Hubbell socket in transom.
INTERIOR LIGHTING - Downlight type LED lights in polished chrome finish with downlighters over reading areas. Meta light rails to give soft indirect lighting in the porthole areas of the lower starboard saloon, aft cabin, and all three guest cabins. Fluorescent lights and downlights in each head, as well as over the galley work surfaces. Red overhead night light at galley. Reading light for each berth and also four corners in the saloon seating areas. Automatic refrigerator and drinks locker door lights. Automatic door light in all hanging lockers, including oilskin locker. Red ‘courtesy’ footlights throughout. Two strip lights in engine room.
EXTERIOR LIGHTING - 2 x lights mounted in lazarette. 24V lights fitted to starboard side of forward end of cockpit and opposite Navtec panel to illuminate cockpit lower area – switched at pedestal. Additional halogen lights aft of mast. Aqua Signal 41 bow and stern navigation lights. Steaming/deck floodlight. Tri-white colour navigation light at masthead.
COMPASSES - Flush-mounted SIRS Marine Major 150mm (6”) diameter steering compass with internal lighting and substantial stainless steel grab rail to each pedestal top.
SAILING INSTRUMENTS - By Furuno.
COMPANIONWAY - 3 x multifunction displays.
STARBOARD PEDESTAL - 2 x multifunction displays. Furuno NavNet display.
PORT PEDESTAL - AP6000 controller. 2 x multifunction display. MOB button.
CHART TABLE - Wind display. Autopilot.
AFT MASTER AND GUEST CABINS - Multifunction displays.
GPS - AP Navigator Mark 10 DGPS system.
RADAR - Furuno radar. Questus self-levelling radar mount.
AUTOPILOT - Autohelm ST60 automatic pilot with twin ‘Grand Prix’ linear drives and Whitlock 24V 1/2hp drive motor. Control heads at pedestal and chart table. Replaced Durban (2018).
WINDEX - Windex at masthead.
NAVTEX - ICS Navtex 4 Plus, including antenna mounted on aerial pole. OCENS satellite and PC weather system.
VHF RADIO - Icom IC-M604 VHF radio, DSC compatible. Two Icom handheld VHF radios.
SSB RADIO - Icom IC-M802 SSB radio-telephone with AT130 tuner. Backstay insulators.
LIFE RAFT - Viking 8-person life raft.
BILGE PUMPS - Par 34600 electric bilge pump with Par hydro air switch. Henderson MkV manual bilge pump. Gusher Mk3 manual bilge pump. Engine driven 1.5” bilge pump – can also be used as a heavy-duty deck or anchor wash.
DECK SAFETY - Lifebuoys. MOM pack. Jackstays. Six large folding Wichard pad eyes for safety harness attachments in cockpits – two for helmsman and four for crew/guests. MOB unit. Emergency tiller.
FIRE EXTINGUISHERS - Various including Sea-Fire automatic and manual fire extinguisher system in engine bay.
ALARMS - Bilge alarm.
RIB/DINGHY - AB Inflatables 13’ tender (2016). Tohatsu 30hp (4-cycle) outboard motor.
WARPS AND FENDERS
CROCKERY - Oyster customised Wedgwood bone china crockery.
CUTLERY - Oyster customised Sheffield stainless steel cutlery.
SAFE - 3-brick safe in aft cabin.
HEYCO MARINE TOOL KIT
ASSORTED TOOLS, SPARES AND MANUALS
MISCELLANEOUS - Four dive tanks. Gas barbecue grill.
NB: All personal belongings and all other items not expressly listed in the above inventory are excluded from the sale.
Viewing through Oyster Brokerage.
Inventory not yet verified by the owner.
Issue 2 (GS/YY/jg)
In this case we are acting as Brokers only. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective Buyer is strongly advised to check the particulars and where appropriate, at their own expense, to employ a qualified Marine Surveyor to carry out a survey and/or to have an engine trial conducted, which if conducted by us shall not imply any liability for such engine on our part. Life-saving appliances do not form part of the inventory and it is for the buyer to ensure they are in date and suitable for their purposes. Buyers are advised to seek appropriate qualified advice with regard to the tax status of the vessel.
© 2022 Oyster Yachts
REFIT ITEMS - GRENADA 2020
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.