2018 Dufour 412

Meer specificaties, uitrusting en informatie:

Naam van boot
Liaison

Specificaties
Werf: Dufour Yachts
Garantie: 3 Jaren
Vlag: United States
Kiel: Bulb
Romp type: Mono Romp

Afmetingen
Lengte over alles: 41 ft 10 in
Breedte: 13 ft 9 in
Lengte over water: 36 ft 6 in
Lengte van dek : 39 ft 4 in
Minimum diepgang: 5 ft 10 in
Maximum diepgang: 5 ft 10 in
Waterverplaatsing: 20326 lbs
Ballast: 5952 lbs
Doorvaarhoogte: 60 ft 10 in
Sta hoogte: 6 ft 5 in
Drooj Gewicht: 19709 lbs

Motor
Totaal vermogen: 55 HP

Motor 1:
Merk motor: VOLVO
Bouwjaar: 2018
Type motor: D2-60F
Type motor: Binnenboord
Motor/Brandstoftype: Diesel
Schroef: Klap schroef
Type aandrijving: Saildrive
Motorvermogen: 55 HP


Tanks
Aantal watertanks: (100 Gallons)
Aantal brandstoftanks: (53 Gallons)
Aantal afvalstoffentanks: (13 Gallons)

Interieur
Aantal dubbele bedden: 2
Aantal hutten : 2
Aantal toiletten: 2

Installaties
Dieptemeter
Log
Wind meter
Navigatiecentrum
Plotter
Automatische piloot
Kompas
GPS
Marifoon
TV - HD TV
DVD speler
Radio
CD speler
Cockpit speakers

Zeilen
Grootzeil volledig met latten
Rol genua

Tuigage
Stuurwiel - 2
Electrische winch - Halyard

Uitrusting Binnen
Electrische bilge pomp
Manuele bilge pomp
Accu lader
Airconditioning
Warm water
Watermaker
Electrische toilet - 1 forward head
Koelkast
Vrieskist

Electrische Uitrusting
Walstroomaansluiting
Omvormer
Stroom: 110V

Uitrusting Buiten
Teak kuip
Kuip Kussens
Cockpit tafel
Zwem ladder
Cockpit douche
Buitenboord motorsteunen
Electrische ankerlier

Hoezen
Bimini
Sprayhood
Lazy bag
Lazy jacks

Accommodations

2 cabins + 2 heads- Oak interior
Laminated floorboard in Wenge
Sliding bench in salon
Salon table convertible info berth
Bora Bora salon Cushions
Air conditioning: reverse cycle 5K forward + 15 K mid section + 5 K aft
Roller blind for deck hatches

Forward cabin:
Berth:200 × 140 cm approx.
Mattress: 10 cm thick foam mattress with washable cover.
Storage: Below berth. - Cubby-hole along side of hull -- Hanging locker with shelves- Below berth - Shoe locker in podium - 
Water tank: Below berth
Access: To navigation instrument transducers

Forward Head
WC: ELECTRIC toilet.
Wash-basin: Wash-basin unit with basin in Corian®C synthetic resin.
Water: Hot and cold water with chrome-plated brass single-lever mixer tap.
Drain: Direct, via an electric pump.
Mirror
Grating: ‘Corian®’ synthetic resin (std) or teak (option)
Ventilation: Via deck panel or opening port.
Cupboards: Storage unit.

Saloon
Saloon banquette: U-shaped banquette on port side.
Central banquette: Fixed central banquette
Table: With fiddles, removable cover with pad for hot dishes.
Storage:
- Below banquette. Storage under seats and behind backrests.
- Behind port banquette back. Bookshelf above banquette
- 3 cubby-holes with doors.
- Removable fiddles
Mast foot: Stainless

Aft Cabin
Berth: 200 × 160 cm approx.
Mattress: 10 cm thick foam mattress with washable cover.
Fuel tank: Beneath berth, starboard side.
Water tank: Beneath berth, port side.
Storage:
- Hanging locker with double door with shelf.
- Cubby-hole along hull liner with fiddle.
Soundproofing:Double bulkhead provides acoustic and thermal insulation from adjoining engine compartment.
Technical area:Between aft berths, with stowage.

Aft Head
WC: Manual sea toilet.
Wash-basin: Wash-basin unit with basin in ACorian®C synthetic resin.
Water: Hot and cold water, chrome-plated brass single-lever mixer tap and shower head.
Drain: Direct, via an electric pump.
Cupboards: 1 high-level 1-door storage unit with mirror
Mirror: Large mirror
Shower grating: ‘Corian®’ synthetic resin (std) 
Ventilation: Via deck panel or opening port.

 

Galley

Refrigerator access: Via the frontage and the worktop
Freezer
Gas cooker: 2-burner stove with oven on gimbals, with removable wooden cover and stainless rail
Microwave oven
Seawater foot pump

Aft starboard side L shape
Worktop: ‘Corian®’ synthetic resin with wooden fiddle.
Sink: Stainless, twin bowls with Corian®C synthetic resin cover
Water: Hot and cold pumped water with chrome-plated brass single-lever mixer tap.
Crockery storage: Dowels to retain crockery when heeling..
Storage:
- 3 cubby-hole with closed compartments with formed wood flap
- 3-door under-sink unit with cutlery drawer, 2 plastic bins, waste bin
- Storage for bottles with locking
Waste bin: Sort compartments
Storage under gas cooker

Cockpit

Teak on cockpit floor and transoms
Cockpit seat in teak
Cockpit table with storage unit and 12 v plug for lamp
Refrigeration in cockpit table 
Sprayhood with handrail
Bimini
Folding sunbed with cockpit cushion
Leather covered steering wheel 
Cockpit portlight in aft cabin
Plancha grill- gaz fired - and sink

Cockpit bench seats: Slatted teak
Lockers: 2 large side lockers, lids fitted with gas struts and fixings for padlocks.
Helm: Wheel
Helm console: Polyester.
Engine control: At starboard helm position
Compasses: 2 on columns
Gas locker: In starboard aft locker
Stern door: Swings up, with built-in telescopic stainless bathing ladder
BIB locker: Life raft stowage in dedicated locker.
Shower: In port stern locker
Supply: Connector in port stern locker
Bathing ladder: Telescopic stainless bathing ladder
Cockpit floor: Non-slip polyester cockpit floor.
Emergency tiller: Head of rudder stock beneath helmsman’s floor for fitting the emergency tiller

Deck

 

Reefing line led to aft cockpit
Life line gates (2)
Aft door stainless steel hand rail
Outboard engine bracket on pushpit
Shower sump pump - Cockpit shower hot and cold
Swim ladder

Stainless steel bow protection
Mooring Kit: anchor 20 KG- 100' of chain 910)- 130' of rope - 6 fenders- 3 docklines-
Electric windlass 1000 w with remote

Standard:
Hand rails: Wood on cabin roof.
Fixed toe rails: 2, wooden
Anchor locker: Self-draining with built-in windlass support and anchor chain eyebolt, lockable hatch cover
Bow pulpits: Seat and separate green/red navigation lights
Stern pulpits: Lifebuoy bracket, jackstaff bracket, navigation light, and opening life-lines with hook.
Stanchions: 8 with 2 rows of life-lines
Other: Solid wooden toe-rail.
Shroud chainplates: Single chainplate for cap shrouds and lower shrouds.
Safety chainplates: Safety harness chainplates in cockpit floor
chainplates: 2 backstay chainplates|
Midships mooring cleats: 2, aluminium
Mooring cleats: 4, aluminium.Rubbing strips: 6 stainless, on hull sheerline
Fuel deck fillers: 1
Water deck fillers: 2
Mainsheet tracks: On coachroof with adjusting car.
Genoa tracks: With car.
Downhaul: With 6-fold purchase tackle.
Pulleys: 2 single genoa sheet return pulleys on coaming
Through-deck fitting: Stainless swan-neck for electrical and electronic cables
Deck organizers: 2 deck organizers, 4- and 3-sheave for halyard, sheet, and reef line returns.
Halyard winches: 1 halyard winch on coachroof.
Sheet winches: 2 genoa sheet winches on cockpit coamings
Jamcleats: 2 rows of jamcleats port / starboard level with the companionway
Furler line jamcleats: 1 at aft end of sidedeck

Rigging and Sails

Full battened Mainsail: 2 wide reef strips- in lazy bag
Dacron Genoa: Furling genoa with UV-protection.

Halyard electric winch updrade T 40
Spinnaker rigging with fixed bowsprit
Adjustable lead car
German mainsheet system

Mast: Anodized aluminium with 2 levels of swept spreaders
Rigging: 9/10 fractional
Mast stepping: On deck
Lights: Anchor and masthead lights
Topping lift: Boom topping lift cleats.
Boom: Anodized aluminium fitted with 2 continuous reefers.
Furler: Genoa roller furler.
Standing rigging: Continuous in stainless single-strand cable, chrome-plated bronze rigging screws, comprising: forestay, twin backstay, inter. and lower shrouds.
Backstay: double
Running rigging: Running rigging in pre-stretched textile including: main and genoa halyards, boom topping lift, main and genoa sheets, 2 continuous reef lines, leech tensioner, 2 mainsheet car adjustments,furling line, downhaul tackle.

 

Engines

55 HP VOLVO - Sail drive
New generation engine, High output alternator 115 amps

Folding Propeller

Electronics

2 x i70 instruments mounted at the helm station with wind, speed and depth
Autopilot p 70 with rotary drive
eS 75 MFD mounted at starboard helm - WIFI and Bluetooth

VHF 

Electricity

110 volts + shore power+ outlets in cabins and salon
Battery charger

5 x batteries

Manufacturer Provided Description

SPACE UNCOMPROMISED at Dufour, the seaworthiness of our sailboats is the keyword on which we never compromise. Performance should not impinge on comfort so we work every day to enhance your on-board life, allowing you to make the most of your magnificent moorings.
The Dufour 412 is a masterpiece in this regard. Impressive hull volume and a 4.20 meters midship beam make it one of the biggest in its category.
This concept is clear in the cockpit which uses all available space to offer various sunbathing areas complete with a huge integrated rear aft deck.
Enjoy your best cruises with the Dufour 412: the perfect balance between steering pleasure and mooring fun.

Construction

Hull: Hand-laminated in polyester/fiberglass.
Decoration: Decorative stripes on the hull.
Gelcoat: NPG gelcoat with first mat impregnated with NPG resin forming an optimum barrier against osmosis.
Structure: Hull bottom counter-moulded, floors laminated into the hull.
Deck: Sandwich with injected foam core
Ballast: Keel bolts bear on stainless back-plates
Rudder: Semi-elliptical shape, filled with closed-cell epoxy foam.
Rudder stock: Solid stainless steel.
Non-slip deck surface: Non-slip structured deck surface

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

External Links
Manufacturer Website