Swan 601 Wohpe, winner of the Swan 60 class at the 2014 Rolex Swan Cup, is now on the brokerage market and available for sale. Since winning the Rolex Swan Cup in 2014, she has undergone a comprehensive refit and now features a new teak deck, all new painting on deck and superstructure.
The Swan 601 has proven to be a serious competitor in both ORC and IRC classes and difficult to catch in light conditions. Well set up for offshore or inshore events, Wohpe is a turn-key program and ready for the Autumn regatta season.
Currently lying in Monaco, Wohpe is available for inspection by appointment.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information. This vessel is offered subject to prior sale, price change,or withdrawal without notice
The Swan 601 is a high-performance sailing yacht - very light for her size and designed to sail at high speeds. She embodies the Nautor's Swan vision of a top-class IRC design Racer/Cruiser. She utilizes the most advanced building techniques and materials, without compromising on the classic lines and beautifully crafted interiors, which are associated with every Swan built.
Wohpe has been carefully designed both in terms of deck layout, exterior finish and interior details to provide a striking looking boat which races competitively under IRC as well as providing a comfortable home whilst cruising (and racing) offshore. Primary and mainsheet winches are electric powered.
The extensive use of carbon fibre in her structure makes this model particularly stiff for her weight and capable of outstanding performance.
The result is a truly competitive yacht without the restrictions of stripped out racers that make few concessions to cruising comfort. She was designed to be both raced and cruised short-handed as required. The owner has enjoyed very close racing with excellent results in the 2008 Swan Maxi Cup circuit in the Med and has also completed an ARC with non-sailing friends on board.
2006 winners of class in Atlantic Rally for Cruisers Invitation Cruising division
2007 Current Swan European Champions
2008 Trofeo Aurora first in Swan Maxi and winner overall
2008 Capri second in Swan Maxi Class
2008 Giraglia first in Swan Maxi Class
2008 Rolex Swan Cup - second in Swan Maxi class and second over all
2008 second in class IRC0 Copa del Rey, Mallorca
HULL & DECK
The hull is of built in a female mould using unidirectional carbon fibre Sprint layers vacuum bagged and oven cured.
Foam cored topsides and single skin underwater.
Structural bulkheads are of Nomex honeycomb cored carbon fibre epoxy pre-preg construction.
Stiffeners are carbon lay-ups with unidirectional flanges and double bias webs.
Engine beds are of CFRP with steel inserts.
Flotation reference marks at bow and stern.
Bottom treated with epoxy primer for improved blistering resistance, and antifouled.
Sea cocks of plastic for all through-hull connections below waterline, closing flush with outside and located in accessible positions.
Faired using long boards and epoxy primer, sprayed with Awlgrip Jet Black (by Berthon, UK) in 2007.
No hull stripes or boot top.
Faired using long boards and coated with Hempel black epoxy.
Primer is sanded and polished to racing bottom standards.
Two coats of sprayed Hempel Hard Racing antifouling applied
Racing keel with narrow steel fin and lead bulb.
Keel bolts are of high-tensile stainless steel.
Fin CNC machined from high-tensile stainless steel.
Bulb and Fin faired using computer cut templates.
Dual steering gear, sheaves provided with guards to prevent jamming.
Lightweight steering quadrant bolted to rudder stock.
Two 1.2 m destroyer type carbon fibre wheels, 1.7 turns H.O to H.O.
Pedestals with roller bearings and friction brake.
One spare carbon wheel (and two spare aluminium wheels,used for deliveries)
Emergency tiller stowed in lazarette.
Foam filled blade with carbon fibre skins and stock, supported by two self-aligning bearings.
Weed deflector in front of rudder.
The ergonomic design on deck ensures the clean, sleek lines of the boat are unbroken and adds to her capacity for high-speed sailing.
Deck is of carbon fibre Sprint sandwich construction with foam core, vacuum bagged and oven cured.
Glued deck/hull joint.
High-density core under deck fittings.
Laid teak 6 mm nominal thickness when new, on side and bridge deck, cockpit sole and seats, glued and vacuum bagged without screws.
Low toe rail in front of chain plates.
Deck surfaces are painted in Hempel Jet black.
Primaries: 80 3 speeds with overdrive box
2 x Primary winches can be driven by removable electric motors fitted as an extra to standard.
Centre removable pedestal.
Mainsheet: 80 3 speed with over drive box
Mainsheet can be driven by a removable electric motor (fitted as extra to standard)
Center mainsheet pedestal clear coated and twisted carbon
Mainsheet pedestal is connected to a Navtec rotary pump
2 x Secondary winches: 68/ 3 speeds carbon self tailing
2 x Halyard winches: 68 / 2 speed carbon self-tailing
2 x Traveller winches: 44 / 2 speed aluminum self-tailing
Anchor windlass and roller:
The vessel has a Lewmar V5 windlass.
On the port side of the bow is a removable SS anchor roller.
Stemhead fitting and chainplates
Stem head fitting for asymmetric spinnaker and code 0.
Carbon fibre chain plates bonded to hull and to reinforced structural knees.
Rollers for three pairs of forward stanchions.
Fairleads integrated into stanchions.
Three removable Aluminium mooring cleats, one forward and two aft.
Pulpit, pushpit and lifeline stanchion 640 mm high of stainless steel.
Three pairs of Custom Carbon winch handle pockets. Socket for flagpole.
Composite mast collar.
Aft bench seat (removable) for cruising.
Large storage area in bow locker. Large lazarette aft.
Hatches and Windows
Hinged fore deck hatch to deck stowageFlush hinged sail hatch and openable deck hatches of composite construction.
Flush side windows.
Main companionway lockable sliding hatch of tinted acrylic with sliding drop-board.
Aft deck hinged GRP hatch to lazarette.
The lazarette is separated with a watertight bulkhead from the interior.
Open stowage in lazarette with separate locker for LPG tanks.
Lightweight carbon floorboards in clear coated carbon, providing access to the bilge.
Full spare set of 10mm painted marine ply floorboards for racing mode.
Inside of lockers – black clear coated carbon.
Topsides where visible lined with lightweight white composite panels.
Overhead lined with removable panelling.
Upholstery - spring mattresses for fixed berths and thick foam mattresses for pipe berths.
Textile covers with Velcro zippers for berths and settees
Double berth on centre, with drawers in the aft end of the bed (these were built in later) – the bed and drawers are all completely removable for racing if wished (mostly though they sailed with the cabin intact). Seats either side aft of bed. On the starboard side is a vanity desk unit with mirror under the lid and a removable stool. Hanging locker aft of vanity unit. Watertight collision bulkhead forward of the bed.
Sony stereo with CD changer unit and two speakers.
On the port side is an ensuite private forward washroom area. This is fitted out with a shower, teak floor grating, stainless washbasin, mirror, lockers, and a Tecma black carbon marine toilet.
L-sofa in saloon on port side. Settee (berth) on starboard side. Cushion / headboards on the forward bulkhead both sides. Locker with acrylic shelves for bottles and glasses on starboard side of saloon, aft of which is a wet locker. Black covers for chain-plates. Carbon saloon table with two teak removable chairs.
Carbon companionway steps.
26-inch LCD TV on the starboard side (runs off the invertor) – this is also removable for racing.
Sony stereo with CD changer and speakers in saloon and cockpit
2 x overhead carbon handrails. Ocean Air blinds on overhead hatch.
Located aft of the saloon on port side in the passage to the aft cabin.
The galley has ample workspace and storage. The work tops are Black Corian. Teak units.
There is an insulated and sheathed space for stove with extractor hood over. Equipment includes: -
Four burner Force 10 gas stoves with oven, gimballed and provided with fiddles.
Stainless steel sinks. Garbage container.
Front loaded refrigerator and a top loaded freezer (both DC driven)
Lockers behind sinks with plate racks for draining and storage.
Quooker ST, 800 W 230 V installed in galley for instant hot water.
Guest / Day washroom area
Aft of the saloon on starboard side a door leads to the guest / day head area, which is fitted out with a stainless Washbasin, mirror, shower, lockers, teak floor gratings and a Tecma black carbon marine toilet.
Aft of the galley to port and aft of the guest head on starboard a doorway leads into the two aft cabins.
Each cabin has: a twin V berth and also a “pipe cot” over with an adjustable rope tackle system attached to the hooks in the ceiling; also, a seat and lockers. There is a removable panel for starboard cabin to make it private from the chart area (which is between the two cabins)
The chart table is situated on the centre line between the two aft cabins and faces forward.
Carbon fibre bulkhead panel behind the nav-seat, provided with shelves.
Instruments and radios, including B&G Hercules 2000, VHF, Iridium, Plotter and PC
Storage in the seat, and behind the seat for charts.
PLUMBING AND VENTILATION
Fresh-water: 100 us gallons 380 litres
One holding tank aft
Hot water tank 22 litres (5.8 US g).
Sea water hoses of reinforced PVC tubing.
Fresh water piping of nylon and copper tubing.
Water tanks of plastic.
Shower sump tanks are of plastic.
Galley spout with foot pump for salt water.
Freshwater systemWater can be heated either with engine cooling water or with a heating element working on AC.
Two fillers port and starboard. Water tank level gauges. Tank vent pipes terminate at galley sink.
Single lever mixing faucets type Oras for washbasins, galley sinks, and showers.
Water-maker Sea Fresh (removable for racing) 30 litres per hour. 24v
Sinks and wash basinsGalley sinks drain through sea cock. Wash basins and showers drain to sump tanks.
Sump tanks are emptied by electrical pumps.
Bilge pumpsTwo hand pumps 100 litres / minute (26 USg). Outlets above waterline.
One electric bilge pump in main sump.
ToiletsToilets using salt water for flushing, and discharging to holding tanks or direct overboard with level indicator. Holding tank (aft) emptied by electrical pump or deck suction line.
230 V AC consumers
Water heater, 1 kW
Service battery charger, 50Amp
Outlets, provided with earth fault protection switch
Larger battery capacity 490Ah, instead of standard 350Ah
24 V DC system with insulated return. Wires are dimensioned to minimise voltage drop.
230V AC is a three-wire system.
A lightning protector on the masthead is connected with heavy cable to a keel bolt.The service batteries are charged by an 80 Amp alternator on the main engine or by a 50 Amp shore powered battery charger with automatic regulation.
The main engine starting batteries are charged by a separate 55 A engine alternator.
Ventilation and heaters
6 x Hella Turbo fans: 2 in the forward cabin, 2 in each of the aft cabins.
2 x boom lights, one over forward cockpit table and one at aft end of the boom.
Indirect light, in owner’s cabin under bunk.
Interior down lighters in all cabins.
Saloon and forward cabin lights have dimmer switches.
Lopo LED navigation lights (including tri colour).
Full B and G Hercules 2000 system including
Paddle wheel speed
5 x FFD displays – one at chart table and four outside (2 aft by the helms and 2 at the forward end of the cockpit).
2 x analogue wind displays
5 x 20/20 repeaters on mast
Halcyon Gyro compass
B and G Loadcell pin
B and G Race Vision with –
Hewlett Packard desk top computer with HP 1750 15” screen and a keyboard.
1 x wireless screen for repeating of B and G race vision
C120 colour radar plotter at nav station
B&G auto pilot, type 3 drive unit. Control panel by the port helm. System is removable for racing.
Simrad AP27 control head with plug-in GRP box in port side of cockpit.
Second plug for auto pilot at companion way inside boat.
Debeg 4422 DGPS (is the same as a Leica unit)
SSB Icom digital receiver (only) into PC
Furuno FM2721 DSC VHF at the chart table
Iridium fixed handset to nav station
SUUNTO 135 mm magnetic compasses, one on each steering pedestal.
Volvo Penta D2-75marine diesel engine, 53 kW (70 HP) at 3000 RPM with Sail Drive 150 S
Flex fold 2 blade racing type folding propeller
Engine space internally sound insulated, fire resistance meeting SOLAS B-15 requirements.
Propeller area sound insulated.
Shut-off valves for each fuel tank.
Fuel valve chest with return valve for each tank.
Fuel filter/water separator with water alarm on feed line to engine.
Tanks are vented to deck edge.
New electrical panel fitted for engine instruments.
Fuel: 316 litres with optional extra factory fitted tank in lieu of forward holding tank.
Fuel tanks are of 2 x plastic and one stainless, and provided with baffles, inspection covers, sounding plug, and vent pipes.
Hall Spars mast and spars built of carbon fibre and clear coated.
Double spreader semi-fractional rig with discontinuous shrouds and 20 deg. swept spreaders.
Two carbon fibre spinnaker poles and one carbon fibre jockey pole.
Dimensions:IG = 23.75 m 77.92 ft. Fore triangle 80.6 m² 868 sq.ft.J = 6.79 m 22.28 ft. Main sail 122.2 m² 1315 sq.ft.P = 23.60 m 77.43 ft. 107% jib 86.3 m² 929 sq.ft.E = 8.37 m 27.46 ft. Spinnaker 290 m² 3124 sq.ft.
Of oval section, with external track / luff groove for mainsail, and trysail track.
Tapered masthead with 2:1 main halyard sheave.
Jib and spinnaker halyard sheaves.
Hall Spars’ burgee stick with fittings, moulded in the carbon masthead, (reach above top of mast)
Hall spars’ standard 5 display bracket:
The mast is stepped through the deck onto a carbon fibre mast step.
Tie rods from mast collar to step.
Spinnaker pole track
The racing headstay has a Tuff luff with twin groves for changing jibs.
Harken roller furling with furling line.
2 x Navtex four-function one-gauge System 50 central control panel with two-speed pump in aft cockpit for backstay, outhaul, Cunningham, and Vang.
Hydraulic mast jack with spacers and removable manual pump.
The mainsheet pedestal has a rotary pump connected via a bevel box with a disconnect. This pump controls all the function on the main control panel, Vang, outhaul and backstay.
The V1’s, D1’s, D2’s, V2/D3’s headstay and backstay are PBO manufactured by Future Fibres, Dec 2006.
There is a complete set of spare rod rigging manufactured by Navtec.
Full set of race rigging.
800L 100% Carbon 26000dpi
800L 100% Carbon 26000dpi
Spectra SR 10.0oz
800L 100% Carbon thin film 16800dpi
800L 100% Carbon thin film 16800dpi
800L 100% Carbon 22400dpi
800L 100% Carbon 22400dpi
800L 100% Carbon 26000dpi
860L Carbon/Aramid 29400dpi
800L 100% Carbon 29400 C/w Tight Scrim
860L carbon Aramid with taffeta
860L Carbon/Aramid 23800dpi
Spectra SR 10.0oz
A - Sails
Superlite 50/60 White
S - Sails
Superkote 60 Silver/Grey
Superkote 60 White
NL 1.7 Norlam
Deck Sprayhood for main companionway.
2 x wheel covers in black
Carbon cockpit table
Cockpit cushions in beige
Anchoring and MooringOne Fortress FX85 (20 kg) anchor, stowed below deck.
10 m of 10 mm (3/8") high-tensile anchor chain.
100 m of 25 mm plaited nylon anchor line.
Four mooring lines.
Six air fenders with lines.
One boat hook stowed below.
Portable anchor light
Sailing GearWinch handles
Safety EquipmentSoftex total flooding system for engine space with remote control at main companionway.Two portable extinguishers in interior.
Fire blanket in galley.Safety belts for navigator and cook.
Two webbing jackstays.
The Owner’s Manual contains directions for use, maintenance and winterising as well as drawings and diagrams for main systems.
Sounding rods for fuel and water tanks.
Two suction lifters for floorboards.
Plumbing spare parts. Engine spare parts. Electric spare parts.
Engine tool kit.