This vessel was found to be a limited production, quality built enclosed utility vessel, by Liberty Yachts in Riviera
Beach, Florida, that is constructed of fiberglass with propulsion provided by a Cummins model QSM 11-M, 660 HP (@
2300 rpm) fresh water cooled marine diesel engine using a ZF model 325 1A, 2.037:1 reduction marine gear coupled
to a single section 2 ½” diameter s/s shaft turning a 110% four blade 30” x 37” custom propeller.
Outfitted with only a fair compliment of marine electronics, two Marine Air sea water cooled marine air conditioning
systems and a Phasor 6.5 KW (@ 1800 rpm) fresh water cooled diesel generator, the spartan interior finished layout
offers a forward stateroom in the bow area offers a centerline queen sized berth. The rasised cabin top trunk area
provides clearance for a toilet compartment on the starboard side, large walkin shower on the port side and centerline
steps leading up to the main deck level house structure with helm station forward on the starboard side. Passenger
seating is across on the port side with convertible settee for over and under berths and the galley area across on the
starboard side. The hinged cabin entrance door leads out to a small well cockpit area with a raised flush deck area on
each side and aft. The aft corner stanchions have been secured inboard with a center open section for access to the
well secured, bolt on, three quarter beam swim platform with a fold down swim boarding ladder off to the port side.
This vessel was found to be well constructed, the spartan and rough interior and exterior finish places the vessel in the
commercial work boat category where a higher market value can be realize.
For Additional information please contact
Craig Witt 619 921 4778