Built in steel by a small team of talented craftsmen in Sidney, British Columbia these custom built steel raised salon cruisers are among the highest quality boats available. RED is the sixth Waterline Yachts-built blue water cruiser we've listed in the past five years. Each has proven to be an impressively conceived and constructed cruising vessel, meeting and more often exceeding the expectations of even the most discerning buyers. RED's maple-trimmed interior is impeccably fitted, her systems are cleanly installed, her coating system (beginning with flame sprayed zinc) is second to none, and she is designed for fast, comfortable and easy long term live aboard cruising. It's no wonder that her present owners have savored their time as the caretakers of this special vessel.
RED features a custom fiberglass hard dodger, raised dinette, and an impressive equipment list. She is ready to set off for further extended cruising with a long list of spares including major engine components, pumps, rebuild kits, rigging and electrical spares.
Hauled for bottom paint and surveyed by Gerry Edwards in July 2019. Survey available for review by prospective buyers.
Swiftsure Yachts is a premiere yacht brokerage located in Seattle, Washington dedicated to selling high quality yachts. Though our home is in the Pacific Northwest, we work tirelessly to help customers find the perfect boat to suit their needs, no matter where they are. Whether that vessel is new or new-to-you, we're dedicated to turning your dreams into realities.
Contact Swiftsure Yachts at (206) 378-1110 or info@swiftsureyachts.com
Please contact Swiftsure Yachts at (206)378-1110
Meer specificaties, uitrusting en informatie:
Naam van boot
RED
Specificaties
Werf: Waterline Yachts
Ontwerper: Ed Rutherford
Vlag: United States
Kiel: Fin kiel
Afmetingen
Lengte over alles: 48 ft 0 in
Breedte: 13 ft 8 in
Lengte over water: 43 ft 0 in
Maximum diepgang: 6 ft 6 in
Waterverplaatsing: 37500 lbs Niet Geladen
Ballast: 11850 lbs
Motor
Totaal vermogen: 88 HP
Motor 1:
Merk motor: Yanmar
Bouwjaar: 1997
Type motor: 4JH2-DTE
Type motor: Binnenboord
Motor/Brandstoftype: Diesel
Bedrijfsuren: 5925
Schroef: 3 bladschroef
Type aandrijving: Directe aandrijving
Motorvermogen: 88 HP
Tanks
Aantal watertanks: Roestvrij staal (150 Gallons)
Aantal brandstoftanks: (176 Gallons)
Aantal afvalstoffentanks: Plastic (20 Gallons)
Interieur
Aantal toiletten: 1
ELECTRONICS & NAVIGATION:
FurunoMFD-12 with US, Mexico & South Pacific Charts
Furuno DRS-4 radar scanner
Furuno SC30 Satellite Compass
Furuno GP-31 GPS
Furuno RD-33 Display
Vesper Marine 850 AIS w/antenna switch
Navico CORUS network instruments w/8 configurable displays and spares
All instruments, GPS & AIS data available via WiFi for phones or tablets
Navico CORUS network autopilot computer with handheld control and spares
VHF: Standard Horizons GX2100 with remote in dodger
HF: Icom IC-M802
SCS PTC-IIe Pactor 3 controller
Autohelm Type 2 Linear drive electric primary autopilot drive on independent tiller arm
Mounted in place Octopus backup electric/hydraulic autopilot drive w/independent tiller arm
Tank Tender fuel/water level gauge
Electrolysis monitor
Fusion RA205 stereo with Bluetooth and remote
Bose speakers and subwoofer
50 Watt/channel stereo power amplifier
Weems & Plath electronic barometer/barograph
High power WiFi for marina Wifi, re-transmitted in cabin
ELECTRICAL SYSTEM:
(12) 2 volt Global/Yuasa 45T commercial deep-cycle batteries
(2) Sunpower SPR E20 327 watt solar panels with MPPT regulator (total 654 watts) on stern arch
Honda eu2001i Genset
Zantrex Interface Link 2000-R battery monitor
Zantrex 2.5KW inverter/130 amp charger
Mastervolt 100A charger
165A Balmar AT alternator w/Balmar MC614 regulator dedicated to charging house batteries
Charles 3.6KW isolation/step-down transformer 120/230V
30A shore power service
(3)12 Volt outlets: galley, nav station & in dodger
(10) 120V AC outlets
120 Volt water heater with heat exchanger to engine
Custom circuit breaker panels
Dedicated engine starting battery
Dedicated alternator for charging engine starting battery
Engine/house systems are independent including batteries, regulators and alternators, may be connected if needed
RED’s hull is coated with red Awlgriplinear polyurethane paint with grey boot stripe. Her deck is painted with light grey Awlgrip Griptex. A welded steel anchor platform/bowsprit extends over the slightly-raked bow and has articulating stainless steel rollers for the self-launching dual anchors. The double bow pulpit extends all the way forward around the anchor platform. The bow/stern pulpits and stanchions are all constructed of 1 1/4” stainless tube. Stanchion heights are taller than average, and she features an extended stern pulpit that wraps to the forward end of the cockpit for added safety and security. Forward of the raised salon cabin top, the deck is nearly flush except for the raised hatch foundations. The cockpit is large and deep, protected by custom fiberglass hard dodger. The “walk-over transom” features a very wide and easily accessed swim platform. The next step up to the transom is generous and provides a comfortable place to sit and works well for scuba or swimming off the transom.
A beautifully constructed stainless steel arch is integral with the stern pulpit. Solar panels, radar and antennas are mounted on the arch.
On-deck storage is in a very large bow locker which also provides a watertight bulkhead forward, and in two large quarter lockers. Forward is the fiberglass-lined anchor chain bin with false floor and overboard drain.
Lighthouse 1501 DWG windlass, dual capstans and chain gypsies
(2) Articulated SS bow rollers
Center bow roller/Sampson post for snubber, kedge or moorings
75# CQR anchor & 300' of 5/16" High-Test galvanized chain
66# Bruce anchor & 330' 5/16" High-Test galvanized chain
300' of 3/4" nylon rode in self-draining locker, forward
(2) Self-stowing chain lockers
Recessed anchor well, with washdown - convenient chain rinsing
Large fiberglass-lined sail locker forward with 24" Lewmar hatch for access
Anchor snubber with chain hook
(6) stainless steel mooring cleats
Hot/cold stern shower
Edson binnacle and stainless destroyer wheel
White plastic cockpit table
(6) Large fixed windows of Pilkington Eclipse® reflective and neutral-tinted lamination - two 6mm layers of heat-strengthened glass and 2.2 mm of PVB
(9) fixed hull portlights (1/2" acrylic)
(8) Lewmar portlights
(4) Opening Lewmar deck hatches (2 in foreberth, 2 in main salon & kitchen)
(2) Opening hatches in dodger
(4) vents forward with closing mushroom type seals
Seahawk Cukote Black antifouling paint (July 2019)
CONSTRUCTION DETAILS:
The hull and deck are constructed of mild steel (minimum 44,000 psi yield) with a plating thickness of 1” on the keel bottom, ¼” on the keel sides, 3/16” on the hull skin, 11 gauge on the house, deck, cockpit, and transom and 10 gauge on the skeg and rudder. The angle framing system runs both transversely and longitudinally. All seams are welded inside and out. 316 Stainless steel attachment points are provided on deck for stanchions, windlass, toe rails, chainplates, and companionway hatch. The toe rail is a grey high density plastic 1 1/2" by 3" rectangular section tube and is mounted on integral welded tabs set just high enough to free all deck water quickly. Integral in the keel structure is a baffled fuel tank. Below the fuel tank is a sealed, lead filled ballast compartment in a bulb appendage. A separate propane locker is integral with the transom. A forward sail locker with deck access provides a watertight collision bulkhead. A self-draining anchor tray is built in. The bow-sprit/anchor roller is steel fabrication and welded into the hull. The salon windows are laminated and heat strengthened reflective coated glass.
The original coating system began with the entire hull being sandblasted inside and out, followed by molten zinc flame-sprayed on the hull above the waterline and on the deck. The entire hull and deck exterior were then coated with successive layers of epoxy (Devoe 235) to a 20 mil thickness. Awlgrip sandable fairing paints were then applied and sanded smooth. The finish coat on the hull and deck is Awlgrip linear polyurethane with a contrasting boot top and cove stripe.
The sandblasted hull interior was sprayed with two coats of zinc-rich epoxy and hand brushed behind all framing. Extra coats of epoxy were applied in the bilge areas. The hull is insulated with polyurethane spray foam to a thickness of 1-1/2” to 3”. Over the foam, the hull sides are lined with white painted mahogany plywood. The deck is finished with Awlgrip Griptex non-skid surface.
SAILS & RIGGING:
Custom mast by Yachtech
Navtec rod rigging
Schaefer 3100 furling gear
Forespar Yachtrod rigid vang
20' aluminum spinnaker pole
Harken Airblocks on all running rigging
Harken mainsheet traveller
Permanent, positive, convenient main boom gybe prevention system
Spectra running backstays
(2) #68 SS Andersen self-tailing winches (primaries), convertible to electric
(2) #46 SS Andersen self-tailing winches (mainsheet/staysail sheet/reefing)
(2) #46 SS Andersen self tailing winches (halyards on mast w/Spinlock clutches)
UK 9.0 oz Cruise Dacron full-battened mainsail w/3 reefs (slab reefing) - recut 2014
North Sails Cruising Laminate 130% genoa - new 2014
UK 10.3 oz Cruise Dacron staysail
Storm Sail
SAFETY:
DBC 4-person valise-type liferaft
Automatic Halon fire extinguisher
ACR 406 EPIRB
Aqua Signal tricolor/anchor light
Hella running lights
Xintex S-2A propane/fume detector with shutoff solenoid
(2) Large Davis radar reflectors, permanently installed on mast
(2) 5# dry fire extinguishers
Lifesling PFD in hard case, mounted on pushpit
EXCLUSIONS:
Clock and barometer in salon area
Personal decorations/Artwork
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
(remove)
2010
Custom
Perry Far Harbour 39
1975
Custom
Pedersen 45 Cutter/Pilothouse
2007
Outbound
44/46
2001
Hylas
49
2013
Hanse
445
1997
Gozzard
44 Aft Cockpit
