Nice clean 1995 Skipjack 262 Flybridge boat for sale in San Diego. Powered by a Volvo Penta TAMD41-AQ diesel engine with 869 original hours. Duo-prop Outdrive was just rebuilt by local Volvo Penta dealer. All pictures are of the Actual Boat taken recently. New Bottom Paint from Shelter Island Boatyard Sept 2017. A Pacific galvanized tandem axle Trailer is also included. Come see this Skipjack today.
Contact Joel Swan at Ballast Point Yachts
For more information or to schedule a viewing
Call my cell phone (619) 952-1119
Please contact Joel Swan at (619) 222-3620
Meer specificaties, uitrusting en informatie:
Romp type: diepe V-romp
Lengte over alles: 29 ft 11 in
Breedte: 8 ft 6 in
Maximum diepgang: 2 ft 6 in
Sta hoogte: 6 ft 5 in
Drooj Gewicht: 6000 lbs
Merk motor: Volvo Penta
Type motor: TAMD41-AQ
Type motor: Binnenboord/Buitenboord
Type aandrijving: Sterndrive
Aantal watertanks: (40 Gallons)
Aantal brandstoftanks: (160 Gallons)
Aantal afvalstoffentanks: (15 Gallons)
Aantal enkele bedden: 4
Aantal toiletten: 1
Manufacturer Provided Description
The Skipjack 262 Flying Bridge features a spacious flying bridge with plenty of room for electronics including radar, VHF, fishfinder, GPS and more. The comfortable swivel chairs are great for cruising or relaxing in port. Inside, the 262 is spacious with plenty of visibility. The forward V-berth measures 7 feet, 3 inches x 5 feet, 3 inches with 4-inch upholstered cushions and storage underneath. Storage shelves run along both sides of the berth. A 20-inch translucent hatch above the V-berth allows desired ventilation and light. The head is fully enclosed with 6-foot headroom and a Formica countertop trimmed in oak or teak (optional) with a stainless steel sink, shower extension from sink, marine head with macerator pump, and 15-gallon holding tank. The galley features a large Formica table with ample space for dining, studying charts, or rigging fishing gear. Seat cushions are handmade and custom fit with 3-inch upholstered foam cushions and tapered back cushions. Storage is provided under both seats. The dinette table converts to a double berth. Construction of the engine room is designed to make routine maintenance simple. All through-hull fittings are cast bronze and are bedded to the hull in polyurethane. Heavy duty hoses are secured with stainless steel hose clamps at each connection. Hoses and wiring are tied down to reduce chaffing and prevent connections from working loose. All fiberglass work below deck is faired, then coated with gelcoat resulting in a smooth finish with easy to clean surfaces. The engine room nicely houses a 6-cylinder inline diesel - a gas V-8 also available.
Gas V-8 also available.
Ballast Point Yachts, Inc. offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his representatives or his surveyors to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.