I'm a boater! Email me yachts and information.

I accept YachtWorld's Terms of Use

1990 Custom Howlett 70 Aerorig

EUR  451,183*
Tighnabruaich, Argyll & Bute, Verenigd Koninkrijk
Geïnteresseerd in deze boot? Tel: +44(0)1590 673715
  • Beschrijving
  • Volledige Specificaties Bekijken

Epic short-handed cruiser

één / diesel
Tighnabruaich, Argyll & Bute, Verenigd Koninkrijk
Materiaal Romp:
Huidige prijs:
£ 375,000 BTW betaald (EUR  451,183) 

A truly unique yacht FLY really is one which has to be viewed to fully appreciated. Built to the exacting requirements of her first owner with a no-expenses-spared attitude her price tag when launched was in excess of £2 million. Fitted out as a mini-super yacht she now represents outstanding value as the ultimate bluewater cruiser.




*** Central Agents ***

*** Over 200 further photographs available on request ***


With only her second owner since she was launched new in 1991 FLY has proved to be ideally suited to short-handed offshore and blue water cruising in extreme comfort. She has completed several transatlantic crossings, two single-handed. The unique rig design and powerful propulsion and thruster system facilitate exceptionally easy manoeuvring in close quarters; the owner often day sailing in and out of marinas with no assistance berthing.


Built to an exceptionally high standard when new there was a focus on reliability and redundancy of systems from the start; this attention to detail has been maintained throughout her life. All major systems being fully backed up with secondary independent systems. Constantly maintained and upgraded in recent years her inventory highlights include:


  • Carbospars Aerorig
  • MTU-Mercedes main engine removed and overhauled 2017/18
  • Nanni auxiliary engine with cassette generator and hydraulic pump fitted new 2001
  • Northern Lights 4.5kw, 1500rpm generator fitted new 2010
  • A total of 7 onboard fuel tanks with integrated fuel ‘scrubbing’/transfer system
  • Hydraulic bowthruster, providing emergency forward propulsion at 5kts
  • Hiduron bronze sterngear, cutlass bearings replaced 2018.
  • Dual independent steering systems
  • Dual independent Autopilot systems
  • Extensive onboard 24VDC battery systems all replaced with new batteries in 2018.
  • Multiple charging systems onboard and shore power.
  • Independent hot water systems for forward and aft ends of accommodation
  • Black water holding tanks.
  • B&G Instrumentation, including Zeus III plotters, 4G Radar, Triton displays and dual autopilots installed new 2019.
  • Iridium Satphone, installed new 2019.
  • Grunert refrigerator and freezer, 230VAC with eutectic holding plates.
  • LED lighting throughout interior.
  • Numerous custom made carbon fibre fittings, including doghouse, boarding ladder, cockpit table etc.
  • Galvanised cradle available as part of sale.


A true mini-super yacht with her self-sufficient onboard systems; all with built-in redundancy she is ideally suited to cruising independently in remoter regions of the world. A real blue water expedition yacht. Lying afloat and in commission in Scotland.




Ian Howlett designed and oversaw the construction of FLY, working closely with the Elephant Boatyard and the interior designer Paul Litton and his team.


Ian Howlett was instrumental in the formation of Carbospars and the subsequent development and refinement of the Aerorig with Damon Roberts. Howlett highly regarded for his exceptional design and engineering skills. His craft honed in the 12m and 6m classes. Some of his notable designs; alongside FLY include the meter class designs LIONHEART, VICTORY and CRUSADER




The Elephant Boatyard is located on the bank of the River Hamble, Hampshire, England. Being the site for the construction of HMS Elephant in 1786; Nelson’s flagship during the Battle of Copenhagen in 1801. The site has been a working boatyard since the launch of that vessel more than 230 years ago. Since 1952 the business has been under the ownership of the Richardson family, with a team of loyal shipwrights and engineers.


The Elephant Boatyard began custom building boats in the 1960’s, pioneering the development of wood/epoxy composite construction. As leaders in the field the yard was at the very forefront of epoxy technology and one of the early adopters of the West System products. With their own building system allowing the yard to take full advantage of this versatile and cost-effective method of custom boat building. In the decades since the yard has worked closely with a wide variety of top yacht designers; Ian Howlett, Ed Dubois, Peter Norlin, Doug Peterson and Ron Holland to name a few. Successfully building a variety of successful yachts encompassing cruising, racing and motor yachts. All of the boats finished to an incredibly high standard’ cementing the yards revered reputation.




The AeroRig was refined by Ian Howlett and introduced to the open market in the UK and Europe by Carbospars. Unique among advanced rigs it was conceived and developed primarily for use on cruising yachts rather than the normal development of racing technology feeding down to the cruising yacht sector. The basic principles behind the design were first employed by Blondie Hasler and his ‘swing rig’ concept in the 1970’s.

The Ian Howlett/Carbospars version is based around an unstayed epoxy/carbon-fibre mast that pivots in a hull socket, very similar to the system found on many sailing dinghies. A broad horizontal yard arm forms an integral part of the mast structure. The yard-arm cantilevering fore and aft of the mast with a fractional stainless steel rod forestay forward and masthead stainless steel rod backstay aft. The Aerorig is in principle very similar to other conventional rigs in all other respects; a 100%, non-overlapping jib on a roller reefing system forward and a traditional, fully battened mainsail on a mast luff track aft.

The Aerorig however requires the balance of the main and jib as part of an integrated sail plan; rotating independently of the hull. The control of the rig is by a single sheet led to the aft portion of the yard arm and controlled on two primary winches in the cockpit. Forces generated by the jib partially counterbalance the forces from the main, so sheet loads are exceptionally low and gybes extraordinarily gentle. With the sail plan balanced; a slightly large force generated by the mainsail, the rig will naturally ‘weathercock’ when left to its own devices.


The concept has proven to be an ideal cruising rig for short-handed sailing and with the ability to self-tack and self-gybe and the great advantage of being able to weathercock the rig to ‘dump power’ at any time. The Aerorig is more efficient & faster than a Bermudan rig on all points with the exception of not being able to carry a spinnaker downwind.




RCD Status:

  • We understand the vessel was built and placed in commission prior to the introduction of the RCD and is therefore exempt from the regulations.



  • Full set of engineering drawings showing onboard systems.


Hull Construction:

  • Wood/Epoxy composite custom-built hull.
  • 45mm Cedar strip planked core.
  • Epoxy laminate applied to Cedar planking internally and externally.
  • Kevlar incorporated within epoxy laminate in forward sections.
  • Hull finished externally with Awlcraft, grey. Professionally applied 2019.
  • Hull below waterline blasted back to epoxy 2019.
  • Conventional eroding antifouling applied below the waterline 2019.


Deck & Superstructure Construction:

  • Wood/Epoxy composite custom-built deck and superstructure.
  • 45mm Cedar strip planked core.
  • Epoxy laminate applied to Cedar planking internally and externally.
  • Carbonfibre constructed doghouse with polycarbonate windows.
  • Superstructure finished externally with Awlcraft, professionally applied 2019.
  • Traditional swept teak deck finish to side decks and cockpit.



  • External bolted-on fin profile ballast keel with winglets.
  • Cast lead construction
  • Bolted-on bronze winglets.
  • Hiduron bronze keel bolts.



  • Elliptical semi-balanced spade rudder.
  • Rudder removed and bearings replaced with new seals in 2018.


Skin Fittings:

  • Hiduron bronze, custom-built seacocks.
  • 3-positions valves with ‘clean’ position and self-cleaning tool.




Main engine & gearbox:

  • MTU marinized Mercedes engine. 240hp.
  • 6 cylinder, inline, turbocharged, Indirectly cooled.
  • Twin Disc hydraulic reversing gearbox.
  • Engine flexibly mounted on flexibly mounted stainless steel frame, double mounts.
  • Racor duplex fuel filtration system.
  • Conventional wet exhaust system.
  • Engine cooling water heats calorifier for forward hot water system.


Maintenance & Performance:

  • Main engine removed from boat and professionally rebuilt winter 2017/18.
  • Rebuild included full strip-down, fuel injection system overhaul, all new flexible hoses, new starter and alternator fitted. Fully re-painted and re-built and re-fitted.
  • 1220 Recorded engine hours at September 2019.
  • Maximum speed 10kts
  • Cruising speed 9kts
  • Economic cruising speed 7kts, fuel consumption 10ltrs per hour.
  • 2,200 nautical mile range on full tanks.


Fuel System:

  • Fitted with a total of 7 fuel tanks.
  • 5 storage tanks transferring to a day tank by electric pumps.
  • Racor turbine fuel filters ‘scrubbing’ the fuel at the time of each tank transfer.
  • Independent fuel pumps and valves for each tank, all interchangeable in case of failure.
  • All fuel system plumbing in braided stainless steel hoses.


Propulsion & Steering:

  • Aquadrive coupling
  • Hiduron bronze propeller shaft
  • Deep-Sea Shaft seal.
  • 42” Maxprop 3 bladed feathering propeller.
  • Inner and outer cutlass bearings replaced 2018.
  • Ambassador ‘Stripper’ rope cutter.
  • Whitlock custom designed and manufactured steering system.
  • Twin wheels and pedestals.
  • Custom-built belt and rod linkage drive system.
  • Both helm stations fully independent.


Auxiliary Engine:

  • Nanni N4, 43hp marine diesel engine. (2001)
  • In-line 4 cylinder, naturally aspirated, indirectly cooled.
  • Driving 24VDC 160A generator, hydraulic pump and emergency high capacity bilge pump with electromagnetic clutch.
  • Engine cooling water heating calorfier for aft hot water system.
  • Wet exhaust system, replaced 2018.


  • Dual B&G autopilots.
  • Full duplicity with independent computers, drive motors, heading sensors, rudder reference units and Triton control heads.
  • B&G rotary chain drive system, connected to rudder independent of manual helms.


Bow Thruster:

  • Custom-designed and purpose-built 360-degree rotating drive unit.
  • Bronze construction.
  • Hydraulically driven, electric rotation motor.
  • Morse single lever control system.
  • Fitted with 3 blade Maxprop feathering propeller.
  • Can be rotated and used as emergency forward propulsion, max speed in ahead 5kts.




Voltage systems:

  • 24VDC onboard power system.
  • 12VDC system for navigation instrumentation.
  • 240VAC shore power with changeover to generator power when at sea.
  • Independent switch panels for each system.


Shore Power:

  • Single 16amp connection.
  • Hardwired RCD protected system with independent switch panel.
  • Isolation transformer to accept 240VAC or 110VAC.


Battery Banks:

  • Domestic Bank – 500Ah capacity at 24VDC. Made up of 2V cells (2018).
  • Engine Bank – 2x 12v lead-acid, Optima 50Ah spiral-wound batteries wired in series for 24VDC (2018).
  • Generator Bank – 1x 12v lead-acid. (2018)
  • Auxiluary Bank – 1x 12v lead-acid. (2018)
  • Electronics Bank – 1x 12V lead-acid (2018).



  • Victron 240VAC – 24VDC, 100A
  • Victron 240VAC – 24VDC, 50A
  • Victron 240VAC – 24VDC, 3A, solid state maintenance charger.
  • 2x 240VAC – 12VDC, trickle chargers for auxiliary engine and generator batteries.
  • Victron Orion 24VDC-12VDC, 20A for electronics bank.



  • 35A, 24VDC driven by main engine auxiliary drive belt, charging engine battery bank and domestics via split charging diode.
  • 50A, 12VDC driven by auxiliary engine, auxiliary drive belt, charging auxiliary engine battery bank only.
  • 160A, 24V DC generator driven by auxiliary engine. (2019)



  • Victron 24VDC – 240VAC, 2kw.
  • Remote control panel.



  • Northern Lights 4.5Kw, 50hz, 1500rpm marine generator (2010)
  • Lugger 1500rpm, three cylinder, indirectly cooled marine diesel engine.
  • Northern Lights direct-coupled single-phase generator.




Fresh Water:

  • Fully pressurised hot and cold system.
  • Dual calorifier hot water system, split between forward and after ends of boat.
  • Mono mixer tap in galley.
  • Manual tap in galley with hand pump.
  • Filter water tap in galley.
  • Mono mixer tap in all heads.
  • Separate showers in each heads.
  • Deck shower in cockpit.


Grey Water:

  • Discharging directly overboard by gravity.


Black Water:

  • Independent tanks for each heads.
  • Heads discharging permanently to tanks.
  • Tanks discharged overboard via electric pumps, manually switch.


Bilge Pumps:

  • Manual bilge pump – x2
  • Electric bilge pumps with manual and auto switching x5
  • Emergency auxiliary engine driven Jabsco high capacity pump with manifold to pump from 3 bilge compartments.

Deck Wash Pump:

  • Electric deck wash pump.
  • Plugin stainless steel fitting on foredeck





  • Total of 6 built-in integral tanks.
  • Fuel transfer system with Racor scrubbing system pumping fuel from 5 tanks into day tank for main engine.
  • Total onboard fuel capacity 3430ltrs.
  • Additional stainless steel 7th tank forward for Webasto, Refleks & Northern Lights generator fed from main tanks.


Fresh Water:

  • 4 off built-in integral tanks.
  • Combined capacity 2,944ltrs



  • Twin calorifiers (2018).
  • Calorifiers both fitted with 240VAC immersion heaters.
  • Main engine heating calorfier for forward heads.
  • Auxiliary engine heating calorifier for galley and aft heads.


Holding Tank:

  • 4 independent tanks, one serving each heads.
  • Combined onboard holding tank capacity 710ltrs.


Tank Monitoring:

  • Series of analogue gauges showing levels in all fuel and water tanks.
  • LED level indicators for each holding tank.




On Deck:

  • B&G 12” Zeus III multifunction displays with chart plotting and radar functionality – x2 (2019)
  • B&G Triton digital display showing Depth/Log/Wind information – x2 (2019)
  • B&G Autopilot control keypads (2019)
  • B&G 4G digital radar scanner, gimbal mounted. (2019)


At Chart Table:

  • B&G 9” Zeus III multifunction displays with chart plotting and radar functionality – x2 (2019)
  • Panasonic Toughbook laptop.

Aft Starboard Cabin:

  • B&G 7” Zeus III multifunction displays with chart plotting and radar functionality – x2 (2019)


Communications Equipment:

  • B&G DSCVHF (2019)
  • B&G AIS Transponder (2019)
  • Iriduim Satphone (2019) - Connected to Toughbook Laptop
  • Icom HF Communications receiver – Connected to Toughbook Laptop
  • Furuno Navtex weather fax – Connected to Toughbook Laptop


  • Dual B&G thru-hull Log transducers.
  • Dual B&G thru-hull Depth transducers.
  • NMEA 2000 wind transducer mounted on pole aft.





  • Origo spirit/230VAC galley hob.
  • Electrolux fan/convection oven 230VAC.
  • Grunert Fridge, 230VAC with eutectic holding plate, top or front loading.
  • Grunert Freezer, 230VAC with eutectic holding plate.
  • Single piece stainless steel worktop incorporating double sinks, fridge and freezer.


  • Electric flush marine toilets in 3 en-suite heads.
  • Manual Lavac marine toilet in crew quarters.
  • All heads freshwater flushing.
  • Toilets discharging through holding tanks.


Air Conditioning:

  • Condaria climate control system (2015).
  • Thermostatic air handlers in all cabins, capable of cooling or heating.


Heating & Ventilation:

  • Webasto diesel fired wet heating system, single 10kw air blower matrix box in companionway.
  • Refleks diesel fired stove in saloon.
  • Goiot deck hatches.



  • All LED lighting thru-out interior (2018)
  • Overhead Lighting
  • Reading lights in way of bunks.
  • Low-level red courtesy lighting



  • Stereo
  • 4 speakers built into saloon, outboard of seating.




Summary of Accommodation:

  • Owners cabin with en-suite heads, dresser and occasional sea-berth.
  • Twin, double guest cabins with en-suite heads.
  • Self-contained crew accommodation including heads and workshop with separate entrance forward.
  • Three occasional berths in saloon.
  • Lee cloths for all bunks & settees.
  • Large saloon open to large galley.


Accommodation Finish:

  • Interior design and construction by Paul Litton
  • Custom-built full walnut interior.
  • Leather saloon upholstery.
  • Silk cushions in cabins.
  • Walnut panel finished bulkheads in cabins.
  • Traditional T&G finish to bulkheads in heads compartments and headlining throughout.
  • Traditional teak and holly finish to sole boards.
  • Single piece stainless steel galley worktop incorporating sinks, fridge and freezer openings.


Description of Accommodation from Forward:


Crew Accommodation:

  • Accessed from dedicated companionway via deck hatch forward of mast or through master cabin.
  • Dedicated heads facilities with Lavac manual marine toilet outboard aft and vanity unit with wash hand basin and Corian countertop forward.
  • Small working area at bottom of companionway with workbench and storage drawers to starboard.
  • Twin single bunks forward, port and starboard. Both bunks fitted with leeboards.
  • Drawer storage beneath bunks to starboard.


Master Cabin Suite:

  • Dedicated heads compartment forward to port.
  • Electric marine toilet outboard.
  • Compact bath aft with shower head.
  • Bidet inboard with 240VAC towel rail above.
  • Vanity unit with wash hand basin and Corian countertop forward.
  • Dresser unit opposite heads with stool and counter top inboard of large mirror.
  • Selection of storage above and below dresser countertop.
  • Queen sized double bunk outboard to port in main cabin.
  • Lee cloth fitted for use in master bunk at sea.
  • Storage cabinet inboard of main bunk, aft.
  • Storage drawers beneath bunk.
  • Bench settee outboard to starboard, converting to full-sized single sea berth with lee cloth.
  • Selection of storage lockers outboard port and starboard overhead.
  • 2 opening deck hatches to provide light and ventilation.
  • 2 portlights in outboard sides of coachroof, fitted with blackout boards.


Main Saloon:

  • Occupying full width of the midships part of the boat.
  • Large U-shaped saloon settee to port
  • U-shaped settee wrapping around large ‘boardroom style’ saloon table; folding out to double in size. Bottle storage provided within the table.
  • Bench settee to starboard.
  • Refleks drip feed diesel stove in centre of bench settee to starboard.
  • Selection of storage lockers outboard port and starboard overhead.
  • Cave lockers beneath seat backs and storage bin lockers beneath.
  • 8 opening deck hatches providing light and ventilation.
  • Portlights in coachroof sides, each fitted with blackout boards.


Navigation Station:

  • To starboard at bottom of main companionway.
  • Large forward facing chart table with dedicated bench-style navigators seating
  • Plotter VHF and Iridium Sat Phone all in easy reach of chart table.
  • Fuel and water gauges and transfer pump control outboard.
  • Ships 24VDC and 240VAC panels aft of navigators seating.
  • Chart storage within table and additional drawers beneath.



  • To port at bottom of main companionway
  • Wrap around U-shaped galley with custom made one-piece stainless steel worktop with walnut fiddles.
  • Twin stainless steel sinks forward.
  • Top loading fridge and freezer outboard forward and aft.
  • Origo 240VAC/Spirit 4 burner, worktop mounted hob outboard
  • Electrolux 240VAC combination oven mounted overhead, outboard, forward.
  • Selection of storage lockers beneath worktop and within central engine box.


Port Aft Guest Suite:

  • Accessed at aft end of galley.
  • Dedicated heads compartment forward to port.
  • Electric marine toilet outboard.
  • Shower stall inboard.
  • Vanity unit with wash hand basin and Corian countertop forward.
  • White T&G style finish to bulkhead.
  • Cabin aft with two single bunks, fitted with lee cloths.
  • Forward outboard bunk doubling as bench style settee.
  • Overhead lockers at forward and after ends with two deep fiddled shelves centrally.
  • Two opening portlights and single opening deck hatch provide ventilation.


Starboard Aft Guest Suite:

  • Accessed at aft end of nav station.
  • Dedicated heads compartment forward to port.
  • Electric marine toilet outboard.
  • Shower stall inboard.
  • Vanity unit with wash hand basin and Corian countertop forward.
  • White T&G style finish to bulkhead.
  • Cabin aft with two single bunks, fitted with lee cloths.
  • Forward outboard bunk doubling as bench style settee.
  • Overhead lockers at forward and after ends with two deep fiddled shelves centrally.
  • Two opening portlights and single opening deck hatch provide ventilation.





  • Custom-designed, purpose-built Carbospars Aerorig.
  • Fully rotating carbon fibre mast and yardarm.
  • Stainless steel rod forestay and backstays, mast otherwise freestanding.
  • Custom-built electric/manual Rotostay roller reefing system for genoa.
  • Genoa is self-tacking/self-gybing.
  • Manual roller furling jib topsail.
  • Tri-sail track
  • Main halyard and spare main halyard replaced 2019 with 14mm Spectra.
  • Polyester mainsheet.
  • MastMate mast steps, rigged to go up mainsail track.
  • Rondal blocks for halyards and running rigging.
  • Spinlock jammers on yard arm for securing halyards.
  • Frederiksen deck sheaves for mainsheet.



  • All winches serviced in spring 2019.
  • Primary Winches – 2x Andersen 66 electric/manual, two-speed, self-tailing.
  • Mast Mounted Halyard/Reefing Winches – 4x Andersen electric/manual 52, two-speed, self-tailing.



  • Mainsail – Vectran. Fully battened, slab reefing, 3 full reefs. Hood Sails (2002)
  • Jib – Vectran. 100%, self-tacking. Roller reefing. Hood Sails (2002)
  • Jib Topsail – Light weather masthead topsail, not used. One Sails. (2012)
  • Tri-sail – Rig on its own dedicated mast track. Not used. North Sails (1991)



  • Stainless steel pulpit and pushpit rails, pushpit rail with central gate.
  • Deck mounted stainless steel stanchions supporting two stainless steel guardwires running the length of the decks.
  • Port and starboard guard wire gates.
  • Teak toerail running the length of the deck outboard with stainless steel ‘Panama’ style fairleads let into toerails.
  • Custom made stainless steel stemhead fitting incorporating double fairleads port and starboard and single bronze bow roller for anchor.
  • Stainless steel cleats mounted on deck, port and starboard, forward, midships forward, midships aft and aft.
  • Stainless steel guard rail running around mast forward, creating grabrails for accessing crew cabins forward.
  • Recess in coachroof creating well around mast for additional security.
  • Recess in coachroof aft of mast creating well in which hard dinghy is stowed on shaped blocks.
  • Custom carbon doghouse protecting forward end of cockpit and companionway, polycarbonate windows forward and port and starboard, sliding section centrally to provide standing room forward to companionway.
  • Twin B&G Zeus plotters mounted in swivelling NavPods outboard of companionway port and starboard.
  • Stainless steel tubular grab rail frame over cockpit, bimini rigs over when required.
  • Bench seating port and starboard forward.
  • Primary winches located outboard on coamings.
  • Twin helm stations port and starboard.
  • B&G Triton display and autopilot keypad mounted on swivelling NavPods forward of each helm.
  • Engine and auxiliary engine control panels mounted centrally.
  • Large lazarette style lockers under aft section of cockpit.


Anchoring & Mooring:

  • Bower Anchor – Stainless steel Delta plough anchor on 160m, 12mm, calibrated chain rode.
  • Kedge Anchor – Fortress lightweight alloy anchor on 150m anchor braid rode, stowed on deck chocks.
  • Spare Anchor – Custom-built stainless steel plough anchor.
  • Hydraulic Anchor Windlass – Maxwell with cockpit control.
  • Fenders – Selection
  • Warps – Selection


Canvas Work:

  • Bimini for cockpit.
  • Sprayhood for forehatch – Crew quarters access.



  • Hard dinghy
  • Stowing in deck recess deck aft of mast, single-handed launching using yardarm.
  • 8hp Yamaha outboard.
  • Sprayhood (2019)
  • Oars.
  • Dinghy cover (2019).



  • Stainless steel frame secured over cockpit to rig bimini cover on.
  • Custom-built carbon fibre cockpit table, finished with bonded teak veneer.
  • Custom-built carbon fibre passarelle, drops down with treads to become swimming ladder.
  • Custom-built carbon fibre boarding step.
  • Custom-built carbon fibre instrumentation mast.
  • Fully galvanised storage cradle available if required, currently lying Troon Yacht Haven.




General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.


Navigation Lights:

  • Lopo Light LED masthead lights, configured for >24m
  • Lopo Light LED low-level port and starboard lights.
  • LED anchor light on yard arm.
  • Cockpit floodlight.
  • Mast pit floodlight.


Life Saving:

  • Seago 4 Person Ocean Spec cannister, deck mounted.
  • Lightweight emergency recovery raft.



Lying, Argyll, Scotland


Available to view strictly by appointment

Office Hours Mon- Fri 0900 – 17.00

Saturday by prior appointment


For more information or to arrange a viewing please contact us.


Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.


Lead Broker: Mark Cameron

Tel: Mobile: +44 (0)7988 763254 Email:

Please contact Alex Grabau at +44(0)1590 673715

Geïnteresseerd in deze boot? Tel: +44(0)1590 673715

Andere boten van Grabau International

Alle boten bekijken van Grabau International
Bezoek Website
*This price is based on today's currency conversion rate.
Zenden ons AUB een email
Vul een geldige naam in!
Voer een geldig e-mailadres in!
RE: Custom Howlett 70 Aerorig, Tighnabruaich, Argyll & Bute, Verenigd Koninkrijk
Bericht mag niet leeg zijn!
bezig met verzenden...

Tel: +44(0)1590 673715
Grabau International

82 Gosport Street , Hampshire
Lymington, Hampshire SO41 9BD
United Kingdom

Grabau International
Vul een geldige naam in!
Voer een geldig e-mailadres in!
Bericht mag niet leeg zijn!
bezig met verzenden...