Close
Close

I'm a boater! Email me yachts and information.


I accept YachtWorld's Terms of Use

1985 Hunter Cutter

EUR  18,082*
Port Jefferson, NY
Geïnteresseerd in deze boot? Tel: 401-240-4602
  • Beschrijving
  • Volledige Specificaties Bekijken
 

ALL OFFERS WILL BE CONSIDERED

Bouwjaar:
1985
Lengte:
11m
Motor/Brandstoftype:
één / diesel
Locatie:
Port Jefferson, NY
Materiaal Romp:
Polyester
YW#:
13304-3586958
Huidige prijs:
US$ 19,950 (EUR  18,082) 

“CURRENT PRICE” IS A GUIDE.  ALL OFFERS RESPECTFULLY CONSIDERED.


General Description
This is a well- designed cutter, capable of offshore passages. She's stiff and secure, predictable in all conditions, with great performance to wind.

Actual Condition
Overall, the appearance of this 37' Hunter is in very good shape. Cosmetically, bright work needs some refinishing; however, it's in good condition. Stress cracks appear throughout decking but does not seem to have any evidence of water intrusion.

The mast is approximately 50' in length, made out of aluminum material, will need some repainting. All the rigging lines and cable appear to be in very good shape. However, no sails were inspected at this time. The canvas/bimini all appear in good condition, but was not completely seen.

Plastic is clear with no rips or tears. Owner stated there were two small tears in bimini when opened and all hatches have a canvas cover; in good shape. The stove and cook top were not checked but the owner stated they were in working condition. These units run from a propane tank which was stored separately in a back hatch in its own container.

All the cabinets were clean and free from any evidence of mold or water intrusion. The vessel has approximately 6'5" height with a fiberglass ceiling. Forward and aft cabins also show well. The head has a Raritan with stand-up shower.

Engine was inspected; it is a Yanmar Diesel, Model 4 JHE, 44hp. Engine idled at approximately 800 rpm. All liquid levels appear to be clean and at proper levels. Engine showed well. No rust under oil pan or oil in bilge. After inspecting engine, the Hunter was started by owner at the dock with no issues.

She was inspected in the water, so bottom could not be inspected at this time. However, owner did point out the vessel was equipped with a breakaway shaft. Hot water heater was inspected; also, in very good condition. This is a great opportunity to own a well-appointed sailboat for cruising. Please inspect carefully before making an offer.

Equipment
A trailer is not included in this sale.

Nationwide transportation is available. Custom Cradles and shipment to port for overseas transport also supplied. Call Robert or Brian at our Mendon, MA Office for logistics and quotes.

Engine(s) Condition
Yanmar Diesel Model 4 JHE.
44hp
Engine idled at approximately 800 rpm
All liquid levels appear to be clean and at proper levels
Engine shows well - No rust under oil pan or oil in bilge

Please read Motors and Machinery Disclaimer.

Motors and Machinery Disclaimer
No statement of condition can be made regarding motors, engines or machinery, whatsoever. A photo may appear of the engine compartment and machinery, but it is entirely the buyers responsibility to inspect and determine their actual condition.





To inspect this vessel please get Viewing instructions.

__________________________________________________________________________

All offers are considered. Do not assume accessories or equipment for this vessel may be in storage. This vessel is being sold as seen. Disclaimer:  The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel.  A Buyer should investigate such details as the buyer desires validated.  This vessel is offered subject to prior sale, price change, or withdrawal without notice.

All Marine products be they owned or brokered by Certified Sales, Inc. or its associates, are sold AS-IS, WHERE-IS, NO WARRANTY OR GUARANTEE EXPRESSED OR IMPLIED.  NO WARRANTIES OF MERCHANTABILITY AND FITNESS WHAT-SO-EVER.  No verbal agreements can be applied to the sale of this marine product. __________________________________________________________________________

For additional information about this vessel, and information about our selling process, please visit www.CertifiedSales.com or www.YachtSalvage.com

Please call us for Co-Brokerage details and agreement. An agreement must be in place confirmed via E-Mail of your request prior to taking an offer or presenting the vessel. Co-Brokerage agreements must be approved by management as well as sale broker. ________________________________________________________________________ Transportation Nationwide transportation is available through Certified Marine Transport. Custom Cradles and shipment to port for overseas transport also supplied. Call Robert or Brian at our Mendon, MA Office for logistics and quotes.



Please contact Mike Costa at (401) 732-6300

Geïnteresseerd in deze boot? Tel: 401-240-4602
Bezoek Website
*This price is based on today's currency conversion rate.
Zenden ons AUB een email
Vul een geldige naam in!
Voer een geldig e-mailadres in!
RE: Hunter Cutter, Port Jefferson, NY
Bericht mag niet leeg zijn!
bezig met verzenden...

Tel: 401-240-4602
Certified Sales, Inc.

1 Bay Avenue
Warwick, RI 02896
United States

Certified Sales, Inc.
Vul een geldige naam in!
Voer een geldig e-mailadres in!
Bericht mag niet leeg zijn!
bezig met verzenden...
Geïnteresseerd in deze boot? Tel: 401-240-4602