Close
Close

I'm a boater! Email me yachts and information.


I accept YachtWorld's Terms of Use

1982 Bristol Channel Cutter 28'

EUR  45,676*
Prijsdaling EUR  3,902 (jul 05)
  • Foto's
  • Video
 
Geïnteresseerd in deze boot? Tel: 360-614-2033
  • Beschrijving
  • Volledige Specificaties Bekijken
 
Bouwjaar:
1982
Lengte:
9m
Motor/Brandstoftype:
één / diesel
Locatie:
Port Ludlow, WA
Materiaal Romp:
Polyester
YW#:
81413-3473285
Huidige prijs:
US$ 51,500 (EUR  45,676) 
Verdere video's:   Kotura Exterior Video

Introducing Kotura, a Bristol Channel Cutter 28’ built in 1982. She was designed by Lyle Hess, the hull was built by Sam Morse in California and the boat was finished by Channel Cutter Yachts in Canada. Kotura is a true gem of a boat. The current owners have kept her in near pristine condition on deck and down below. Their plan was to circumnavigate but health forces the sale. They were the 2nd owners and have thoroughly enjoyed sailing Kotura for the last 7 years.

Kotura is powered by a single cylinder Sabb 10HP diesel engine that pushes her along between 5.5 – 6 knots with a reverse pitch propeller. The engine is currently set up to run on Bio-Diesel, although there is no conversion necessary if straight Diesel is preferred. Her hull appears to be in excellent condition as well as her decks and rigging. The standing rigging was recently inspected, the UHMW mast step is new, all the finished wood on deck was wooded 1 year ago and coated with Cetol, her decks were recently reefed and re-caulked and her bow sprit is brand new, made from Douglas Fir by the Shipwright’s Coop in Port Townsend, WA. The North Sail main is new and the Jib and Staysail are both on Furlers, controlled from the cockpit. To charge the AGM sealed battery is a 10amp Marinco Charge Pro battery charger. Pulling up the 35lb CQR and BBB chain is easy with the Electric Lofrans’ Windlass and there is an Anchor & Deck Wash Down System for quick easy clean-ups. 

Entering the cabin through the main companionway hatch takes you down a ladder into the beautifully varnished interior. There are two quarter-berths aft that are wide and comfortable. To port is a nicely laid out galley with a Dickinson Pacific Diesel Stove, 2-burner Propane Stove, lots of storage and a sink with fresh and salt water electric pumps and a manual fresh water pump for underway. All interior lights are LED and above the Chart Table on starboard is a red or white LED light for night time vision. Above the chart table is the electronics panel and a Raytheon RADAR, Seafarer Depth Sounder and NDi VHF radio. Below the Chart Table is an Ice-Box and storage. She also has a stereo/CD Player down below with Salon speakers. Forward of the Galley and Chart Table is the Salon with two large settee’s on either side with storage above, behind and below (these two settees could easily be joined to make a large double if the new owners desired). Forward of the Salon is storage on starboard and port with nice closet space and cubby space. The head is located at the peak and is professionally engineered to easily disappear when not in use with a varnished hinged wood cabinet that easily lifts and lowers into place. The current owner also engineered the toilet so that it can slide forward under the forward scuttle hatch for increased head-room, if so desired. The head is an Airhead Composting Toilet which means No-Smells and No-Clogs. The Head uses coconut bricks to break down the waste to a dirt like material which is easy to handle. There are two 6-volt motorcycle batteries forward to power the head fan that charge off of a solar panel on deck. Kotura has been incredibly well cared for and is in near showroom condition.

There are lots of spares and equipment included with the purchase including a Salon Table, Life-Raft, spare alternator, spare belts, and a spare propeller.

Kotura is in excellent condition and is ready to take her next owner(s) anywhere they’d like to go. Kotura is turn-key and ready for her next adventurer(s)!

Showings available immediately by appointment only.

We offer instruction and delivery assistance, ask us for more information!





Call Rob (360) 316-9370

 



Please contact Rob Sanderson at 360-316-9370

Geïnteresseerd in deze boot? Tel: 360-614-2033
Bezoek Website
*This price is based on today's currency conversion rate.
Zenden ons AUB een email
Vul een geldige naam in!
Voer een geldig e-mailadres in!
RE: Bristol Channel Cutter 28', Port Ludlow, WA
Bericht mag niet leeg zijn!
bezig met verzenden...

Tel: 360-614-2033
Port Townsend Boat Company

919 Haines Place
Port Townsend, WA 98368
United States

Port Townsend Boat Company
Vul een geldige naam in!
Voer een geldig e-mailadres in!
Bericht mag niet leeg zijn!
bezig met verzenden...
Geïnteresseerd in deze boot? Tel: 360-614-2033